3ds Max Material Slot Black

This article explains how troubleshoot and fix an issue with black swatches in the 3ds Max Material Editor.

1. By default, a standalone map in a slot fills the whole slot. This is when the slot shows only a map; for example, when you drag the map onto the slot from elsewhere in the 3ds Max interface. When a map is assigned to a material, the slot shows it as part of the material, mapped to the sample object. See Get Material and Material Editor Options.
2. I think you may be referring to a problem I had a while ago, afaik max will only show 24 slots in the editor, in order to allocate more materials, you have to use multi/sub-object materials, which will allow you to assign and edit many more materials, but you'll have to start using material ids in order to implement these into your scene.

Issue

Grosvenor g casino london piccadilly. Sometimes, when opening the 3ds Max Material Editor, the material swatches may rendered black in the Material/Map Browser; or the Sample slots may be rendered with a flat color. See the examples below.

There are several potential causes of the issue. Some of them and their solutions are explained in detail in this article.

3DS Max - Render to texture results in black screen when saved to file. Polycounter lvl 9. Offline / Send Message. Render out a single unmodified box with no material using a mental ray light (any) it comes out black. The only light that works is the standard 'Skylight', which is no good. This is 3ds Max.

Licensing Issues

COMPACT EDITORSLATE EDITOR

Rendering the swatches in the Material Editor, just like rendering an image, requires a license. Ensure that:

• The Chaos License Server is installed;
• TheChaos License Server is running;
• You have available V-Ray for 3ds Max licenses.

For more information on setting up your licenses, see this article.

3ds Max Material Slot Black And White

V-Ray is not set as the Material Editor's Renderer

COMPACT EDITORSLATE EDITOR

By default, V-Ray is set as the render engine for the Material Editor. In some cases, however, another renderer might be selected, which will cause the V-Ray material swatches to render black.

Assign the renderer to V-Ray manually from Render Setup > Common > Assign Renderer > Material Editor.

Force a Re-render of the Swatches

COMPACT EDITORSLATE EDITOR

Sometimes a re-render of the Material Editor swatches may be the simpler solution.

There are a couple of ways to do that:

• Set the render engine for the Material Editor to another render engine and then switch back to V-Ray (check above)

• Use the Material/Map Browser options > Additional Options > Clear Preview Thumbnail Cache command
  
  
  

• Change the size of the material swatches in the Slate Material Editor by right-clicking on the material group > Display Group(and Subgroup) As: Small / Medium / Large Icons
  
  
  

• Change the size of the material swatches in the Compact Material Editor by right-clicking on any material swatch > 3x2 / 5x3 / 6x4 Sample Windows
  
  

Rendering in the Material Editor is Disabled

SLATE EDITOR

Avi resort & casino laughlin nv. The swatches will not render if rendering for the Material Editor is disabled.

Make sure that rendering is enabled by toggling the teapot () button in the lower left corner of the window.

Manual Update is Turned On

COMPACT EDITOR

The Sample Slots in the Compact Material Editor will not update automatically if the Manual Update option is turned ON.

Turn it off from the Options dropdown > Options. > Manual Update.

Wrap poker omaha.

You'll add some materials to help visualize your revolving door. You'll add a shiny black finish for the struts and a green glass material for the glazing in the door and the enclosures. You'll also edit the material that already exists on the revolving door, so it matches your own green glass.

Set up the lesson:

• Continue from the previous lesson, or on the Quick Access toolbar, click (Open File) and open add_door_materials.max in the startup folder.

Open the material editor:

1. On the main toolbar, choose (Material Editor) from the Material Editor flyout to open the Compact Material Editor.

   The Material Editor opens as a floating window.

   The Compact Material Editor is usually more convenient when you want simply to assign materials that have already been designed. The Slate Material Editor, which takes up more screen space, is more convenient and versatile for designing materials.

   NoteIf you open the large Slate Material Editor by mistake, then from the Material Editor toolbar choose Modes Compact Material Editor.

Apply a door material:

You can choose materials from a material library and apply them to the revolving door so the panel is transparent.

1. On the Material Editor toolbar, below the sample spheres, click (Get Material).

   3ds Max Design opens the Material/Map Browser.

2. On the Material/Map Browser, click (Material/Map Browser Options) (or right-click an empty area of the dialog), and from the pop-up menu, choose Open Material Library.

   3ds Max Design opens a file dialog.

3. Highlight the file aectemplates.mat, and then click Open.

   This library is located in the materiallibraries subfolder of your current Project. If it doesn't appear in the file dialog when you click Open, browse to this directory, then open the library.

   NoteThe filename extension for 3ds Max Design material library files is MAT.

   A section for the library now appears in the Browser.

4. In the Browser, double–click the material name Door-Template.

   The door material appears in the first sample slot of the Compact Material Editor.

5. Close the Material/Map Browser.
6. Drag the material from the sample sphere to the door object in the viewport.

   The door now displays with transparent glass. Also, in the Material Editor, the sample sphere is now marked with corners showing that this material has been applied to an object in the scene.

   TipIf you loaded the provided scene file, you might get a message that asks you to Replace or Rename the material. Choose Replace and continue.

Create and apply a green glass material:

1. Click any unused sample slot in the Material Editor to activate that slot.

   By default, materials in the Material Editor are of the Arch & Design type. You'll change this material to the Standard type.

2. Click the Material Type button button to the right of the material name (its label now says 'Arch & Design').

   3ds Max Design opens the Material/Map Browser again.

3. In the Material/Map Browser, locate Materials Standard Standard, then double-click the entry Standard.

   In the Compact Material Editor, the material type changes from Arch & Design to Standard.

4. Drag the material onto the left enclosure panels object. Drag from the material sample sphere to the viewport, and read the tooltip to be sure you have the left enclosure object (left enclosure panels) as the target.

   The glass panels of the left enclosure change their appearance in the viewport.

5. On the Blinn Basic Parameters rollout, change the color of this material by clicking the Diffuse color swatch. When the Color Selector opens, pick a green color.

   'Blinn,' named after computer-graphics pioneer James Blinn, is the default shader type used by the Standard material. A shader determines how the material interacts with light. And 'Diffuse' refers to the basic material color. You'll find more information about these and about materials in general in the User Reference.

   Watch in the viewport; each time you click a different color, the material updates in the viewport. When you've decided on a color, click the Close button.

6. On the Blinn Basic Parameters rollout, change the Opacity value to 66.
7. Rename the current material to Green Glass. Highlight the name and then enter the new name.
8. Drag the Green Glass material from the sample sphere in the material editor to the right enclosure panels objects in the viewport.

   Now the glass on the right enclosure matches the color and transparency of the left enclosure.

Create a black metal finish:

1. In the Material Editor, activate a different unused sample sphere by clicking it.
2. Name the material Black Metal Finish and change it to the Standard type, as you did before.
3. On the Shader Basic Parameters rollout, click the drop-down arrow next to Blinn and choose Metal.

   This shader is more appropriate for metallic materials.

4. On the Metal Basic Parameters rollout, click the Ambient color swatch. In the Color Selector, choose a dark color close to black. You can use the Whiteness slider to darken the color.
   NoteThe Diffuse color changes to the same dark color, since the Diffuse and Ambient values are locked together by default.

   'Ambient' refers to the lighting that spreads out within a scene without being cast directly by a light source. Typically it's reflected off surfaces such as walls.

5. Set Specular Level to 128 and Glossiness to 85.

   These two settings determine the brightness and size of shiny highlights, respectively.

   All of these settings combine to produce a black, shiny surface treatment.

6. Press H on the keyboard, then select the Struts objects by name. Hold down the Ctrl key and highlight the names, and then click OK to select both objects and close the dialog.
7. In the Compact Material Editor, click (Assign Material To Selection) to apply the material to the struts.
8. Drag this material onto the central hub object (Cylinder01).

Edit the material:

After you created the pivot door, you assigned a Multi/Sub-Object material from a material library to the door. When you have a single object, such as this door, with different, distinct components (such as glazing, frame, and so on), you can use a Multi/Sub-Object material to apply different materials to its various parts.

• Use the Material/Map Browser options > Additional Options > Clear Preview Thumbnail Cache command
  
  
  

• Change the size of the material swatches in the Slate Material Editor by right-clicking on the material group > Display Group(and Subgroup) As: Small / Medium / Large Icons
  
  
  

• Change the size of the material swatches in the Compact Material Editor by right-clicking on any material swatch > 3x2 / 5x3 / 6x4 Sample Windows
  
  

Rendering in the Material Editor is Disabled

SLATE EDITOR

Avi resort & casino laughlin nv. The swatches will not render if rendering for the Material Editor is disabled.

Make sure that rendering is enabled by toggling the teapot () button in the lower left corner of the window.

Manual Update is Turned On

COMPACT EDITOR

The Sample Slots in the Compact Material Editor will not update automatically if the Manual Update option is turned ON.

Turn it off from the Options dropdown > Options. > Manual Update.

Wrap poker omaha.

You'll add some materials to help visualize your revolving door. You'll add a shiny black finish for the struts and a green glass material for the glazing in the door and the enclosures. You'll also edit the material that already exists on the revolving door, so it matches your own green glass.

Set up the lesson:

• Continue from the previous lesson, or on the Quick Access toolbar, click (Open File) and open add_door_materials.max in the startup folder.

Open the material editor:

1. On the main toolbar, choose (Material Editor) from the Material Editor flyout to open the Compact Material Editor.

   The Material Editor opens as a floating window.

   The Compact Material Editor is usually more convenient when you want simply to assign materials that have already been designed. The Slate Material Editor, which takes up more screen space, is more convenient and versatile for designing materials.

   NoteIf you open the large Slate Material Editor by mistake, then from the Material Editor toolbar choose Modes Compact Material Editor.

Apply a door material:

You can choose materials from a material library and apply them to the revolving door so the panel is transparent.

1. On the Material Editor toolbar, below the sample spheres, click (Get Material).

   3ds Max Design opens the Material/Map Browser.

2. On the Material/Map Browser, click (Material/Map Browser Options) (or right-click an empty area of the dialog), and from the pop-up menu, choose Open Material Library.

   3ds Max Design opens a file dialog.

3. Highlight the file aectemplates.mat, and then click Open.

   This library is located in the materiallibraries subfolder of your current Project. If it doesn't appear in the file dialog when you click Open, browse to this directory, then open the library.

   NoteThe filename extension for 3ds Max Design material library files is MAT.

   A section for the library now appears in the Browser.

4. In the Browser, double–click the material name Door-Template.

   The door material appears in the first sample slot of the Compact Material Editor.

5. Close the Material/Map Browser.
6. Drag the material from the sample sphere to the door object in the viewport.

   The door now displays with transparent glass. Also, in the Material Editor, the sample sphere is now marked with corners showing that this material has been applied to an object in the scene.

   TipIf you loaded the provided scene file, you might get a message that asks you to Replace or Rename the material. Choose Replace and continue.

Create and apply a green glass material:

1. Click any unused sample slot in the Material Editor to activate that slot.

   By default, materials in the Material Editor are of the Arch & Design type. You'll change this material to the Standard type.

2. Click the Material Type button button to the right of the material name (its label now says 'Arch & Design').

   3ds Max Design opens the Material/Map Browser again.

3. In the Material/Map Browser, locate Materials Standard Standard, then double-click the entry Standard.

   In the Compact Material Editor, the material type changes from Arch & Design to Standard.

4. Drag the material onto the left enclosure panels object. Drag from the material sample sphere to the viewport, and read the tooltip to be sure you have the left enclosure object (left enclosure panels) as the target.

   The glass panels of the left enclosure change their appearance in the viewport.

5. On the Blinn Basic Parameters rollout, change the color of this material by clicking the Diffuse color swatch. When the Color Selector opens, pick a green color.

   'Blinn,' named after computer-graphics pioneer James Blinn, is the default shader type used by the Standard material. A shader determines how the material interacts with light. And 'Diffuse' refers to the basic material color. You'll find more information about these and about materials in general in the User Reference.

   Watch in the viewport; each time you click a different color, the material updates in the viewport. When you've decided on a color, click the Close button.

6. On the Blinn Basic Parameters rollout, change the Opacity value to 66.
7. Rename the current material to Green Glass. Highlight the name and then enter the new name.
8. Drag the Green Glass material from the sample sphere in the material editor to the right enclosure panels objects in the viewport.

   Now the glass on the right enclosure matches the color and transparency of the left enclosure.

Create a black metal finish:

1. In the Material Editor, activate a different unused sample sphere by clicking it.
2. Name the material Black Metal Finish and change it to the Standard type, as you did before.
3. On the Shader Basic Parameters rollout, click the drop-down arrow next to Blinn and choose Metal.

   This shader is more appropriate for metallic materials.

4. On the Metal Basic Parameters rollout, click the Ambient color swatch. In the Color Selector, choose a dark color close to black. You can use the Whiteness slider to darken the color.
   NoteThe Diffuse color changes to the same dark color, since the Diffuse and Ambient values are locked together by default.

   'Ambient' refers to the lighting that spreads out within a scene without being cast directly by a light source. Typically it's reflected off surfaces such as walls.

5. Set Specular Level to 128 and Glossiness to 85.

   These two settings determine the brightness and size of shiny highlights, respectively.

   All of these settings combine to produce a black, shiny surface treatment.

6. Press H on the keyboard, then select the Struts objects by name. Hold down the Ctrl key and highlight the names, and then click OK to select both objects and close the dialog.
7. In the Compact Material Editor, click (Assign Material To Selection) to apply the material to the struts.
8. Drag this material onto the central hub object (Cylinder01).

Edit the material:

After you created the pivot door, you assigned a Multi/Sub-Object material from a material library to the door. When you have a single object, such as this door, with different, distinct components (such as glazing, frame, and so on), you can use a Multi/Sub-Object material to apply different materials to its various parts.

You will use the eyedropper to get the material from the door into the Material Editor. This will give you a second copy of the material to edit, leaving the original available for use.

1. Click another sample sphere, to make it active.
2. In the Material Editor, click (Pick Material From Object) to activate it, and then in the viewport click the pivot door.

   The sample sphere is replaced with a sphere that shows five stripes of different materials. This indicates that the selected material is a Multi/Sub-Object material.

   On the Multi/Sub-Object Basic Parameters rollout, you can click and access each individual material.

3. Drag the Green Glass sample sphere to the button labeled 'Inner Bevel (Standard).' On the Instance (Copy) Material dialog choose Instance, then click OK.

   When you copy something using the Instance option, changing one instance changes all of them. For example, if you then made the glass a neutral color, all the instances would reflect that change.

   This is the material that is applied to the glazing. The glass on the revolving door turns green in the viewport.

4. Drag the Black Metal Finish material to the other material slots of the Multi/Sub-Object material. In each case, choose Instance.

Change the material:

Now make changes to the material and watch them update on the objects in the viewport.

Change the Black Metal Finish to a shiny gold instead. Do the following:

1. Click the Black Metal Finish sample sphere.
2. Click the Diffuse color swatch, and then change the black material to a gold material. Use RGB values of approximately 176, 157, and 52, respectively, to achieve a nice gold tone.
3. Rename the Black Metal Finish material to Burnished Gold.
4. Click the Perspective viewport Shading menu (now labeled 'Smooth + Highlights + Edged Faces'), and turn off Edged Faces.

   Close the Material Editor when you're done.

Save your work:

3ds Max Material Slot Blackout

• Save the scene as my_add_door_materials.max.

3ds Max Material Slot Black Box